- Operates with 1 Phase 230V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.
- Due to inverter technology, energy efficiency is higher than the conventional machines.
- TIG arc ignition by HF or Lift TIG.
- Thin metal sheet welding due to its stable low currents starting from 5 Ampere.
- Basic TIG settings; Welding Current, Slope-Down, Post-Gas and Crater Filling.
- Triggering via torch as 2/4 or with foot pedal as On/Off.
- Welding parameters are monitored on the digital display.
- Excellent welding characteristics for rutile and basic electrodes.
- Stable welding current without loss of performance due to electric line fluctuations or with long welding and electrical cables.
- Excellent for outdoor use with IP 23 protection class.
- Portable lightweight design but withstands tough working conditions.
- Fan cooling and thermal protection against overheating.
Power Source | ||||
Mains Voltage (1Ph) | 230 | V | ||
Input Power (MMA) | 9.55 (%25) | kVA | ||
Şebekeden Çekilen Efektif Akım (MMA) | 15,54 | A | ||
Input Power (TIG) | 6.69 (%25) | kVA | ||
Şebekeden Çekilen Efektif Akım (TIG) | 14,55 | A | ||
Welding Current Range | 5 - 200 | ADC | ||
Nominal Welding Current | 200 (%25) | ADC | ||
Open Circuit Voltage | 65 | VDC | ||
Electrode Diameter | 2.00 - 4.00 | mm | ||
Tungsten Electrode Diameter | 1.00 - 2.40 | mm | ||
Dimensions (l x w x h) | 520 x 160 x 312 | mm | ||
Weight (Net) | 10 | Kg | ||
Cooling Type | Hava | |||
Protection Class | IP23 |