Magmaweld RS 200 MK – MIG/MAG Welding Machines
Affiliate page:
2,160.00 AZN
Out of stock
- RS 200MK is suitable for manufacturing with thin steel profiles and metal sheets .
- Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.
- Welding voltage and wire feed speed (corresponding to welding current) are set on the front panel. Optimum welding parameters can be selected from the table on the front panels. RS200MK has digital V, A Meters.
- Manual wire feeding & gas valve buttons, Soft Start, Pre-Gas, Post-Gas, Burn-Back timer settings are in the wire feeding cabinet.
- RS 200MK works with 2/4 torch trigger mode .
- ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used.
- 220V AC outlet for CO2 gas heater.
- Built in gas cylinder platform with large wheels to ease mobility in workshops.
- Fan cooling and thermal protection against overheating.
| Power Source | ||||
| Mains Voltage (3Ph) | 400 | V | ||
| Input Power | 7.9 (%23) | kVA | ||
| Input Current (Eff.) | 12 (%23) | A | ||
| Welding Current Range | 40 - 240 | A | ||
| Nominal Welding Current | 240 (%23) | A | ||
| Open Circuit Voltage | 17 - 36 | V | ||
| Voltage Adjustment Steps | 2 x 7 | |||
| Dimensions (l x w x h) | 890 x 460 x 950 | mm | ||
| Weight (Net) | 101 | Kg | ||
| Protection Class | IP21 | |||
| Wire Feeder System | ||||
| Welding Wire Diameter | 0.60 - 1.00 | mm | ||
| Standard Roller Groove Size | 0.80 - 1.00 | mm | ||
| Wire Feeder Roller Diameter | 37 | mm | ||
| Wire Feeding Speed | 1 - 24 | m/dk | ||
| Torch Trigger Control | 2 / 4 | |||
| Spool Capacity | 20 | Kg | ||
